Mobile Damaged

Mobile Repair Solution

How to Flash Nokia RM 205-862 Via USB Without ATF UFSx HWK Box

Tutorial on flashing using usb cable on Nokia RM 205-862-because many are finding this tutorial, then the damaged cell phone blog will create a mild discussion on this page, and I specialize work without box flasher as ATF, UFSx HWK, or other Nokia flasher box. So we'll use a usb that has been cut and soldered directly to the pcb Board via usb 2708.

The following steps flash Nokia 205:

  1. Grab file Nokia US ROM Driver
  2. Save and install the Nokia PC SUite (for yg already installed on his computer, no longer need to)
  3. Cut the usb and solder to 2708 as pictures at 2708 Nokia 205
  4. Grab and save and then extract the files flash in articles 205 Nokia Firmware rm-862
  5. Grab and extract the software to flash Nokia, in the Link to Best v1.5
  6. Open the file URbest4.exe from the extract file number 3 above.
  7. Click connect and select ' usb '.
    Tutorial on flashing a Nokia rm 105-908 more information you can read in this blog.
    Select USB
  8. Enter one by one flash files/firmware Nokia 205 that has been previously saved, i.e. the file MCU (mcusw), PPM (ppm _) and CNT (image _). after it dumped the check mcu and ppm only while in the cnt is checked.
    The complete tutorial you can see on this blog, thanks
    Enter the file one on one
  9. Check the only dead mode, Normal, and Set factory set. Then click FLASH.
    You can read more in this tutorial live on mobile blog is broken.
    The tick 1, 4, and 5
  10. After you click the FLASH then connect usb that has been soldered in hp (don't forget to plug the battery in hp) to the computer, if the computer comes up asking for the driver please navigate to folder Nokia usb rom driver that you have save and extract.
  11. The program will be the way of doing flash, wait until it is finished and a Nokia phone 205 terdetect you live and on the computer (must install pc suite in order to detect)
  12. Completed.

Remember!!!

  • How to flash Nokia other types can be seen in the article FLASH NOKIA
  • Flash is only part of the CNT course to overcome the damage minor such as; user code, hank, totally off lightly.
  • Otherwise catch fire then you repeat doing Flash on MCU course with hope when life will keep speaking in Indonesia.
  • If it still fails, then check the third file, but Indonesia will not appear important hp live a normal life.
  • Don't forget to plug the battery in hp when want to flash.
  • Make sure the usb solderan correct image.

Thus the stage of doing flash Nokia rm 205-862 by using usb as interfacenya, to 2708 how to flash using atf and hwk I can not publish. Continued to visit the Damaged cell phone and follow the blog to get the latest articles more.

Updated: April 8, 2016 — 7:41 pm

The Author

Leave a Reply

Your email address will not be published. Required fields are marked *

Ponsel Rusak © 2016 Frontier Theme