Mobile Damaged

Mobile Repair Solution

How To Use Flash Files Via The Volcano Scatter Box

Flashing scatter files using Volcano box-as it is already known that for Android ngeflash china Affairs with MTK chips then this can use SP Flashool you get for free on the internet because it is issued by URMediatek.inc to help this Android user to be able to fix this smartphone.

Flash files/firmware/stockrom are available mostly in the form of diinternet scatter files there are also sub files such as; preloader, uboot, boot., image cache, system, and so we are also accustomed to use the re-create flash files.

But sometimes in the process of flashing this we will find various error messages that emerged from the flashtool with various different codes can be seen on the pages of Explanation Error SP Flashtool, so we need to replace some version of sp flashtool to acquire a version that matches the type china android smartphone we're working on.

But that already has a box flashing android china then it can also use a scatter file already scattered diinternet, so we don't need to be hard-hard-looking for a file backup in the form of BIN file, because very little once the share file backups in the file BIN of results read the flash box.

Read First: How To Install The Latest Flasher Box Volcano

How to flash a scatter file Box Volcano:

  1. On the installation folder of your volcano, please go to URVolcanoUtility.exe How to flash files scatter box with volcano
  2. After the open, left tab select Android and on the right on USB MODE select ' Read Info ' first and then START, then plug your mobile phone with battery installed (remember usb vcomm should already be installed)

  3. After completion of the Read Info and unreadable please select ' Write Fac File ' then click START.

  4. Stages of flashing files using the volcano scatter box flasher.

  5. After appearing ScatterListForm then click Scatter Loading then it will open a new browser and then you select and double-click scatter in accordance with the type of Android that will be flashed..

    Stages of selecting files scatter on a volcano box flasher

  6. Then all the rom list will appear in a browser, if there are files you want to flash then the flue check that file. But by default is checked all. Then click OK

    Stages of selecting files scatter that will be flashed. using a volcano box.

  7. Off and plug the battery again and then plug in the usb.
  8. Flashing will soon be running.
  9. If not successful please close the Volcano Tool and start again from scratch.
  10. Completed

So how to use box flasher Volcano to ngeflash using file scatter on Android MTK may be useful, for the way the installation Box Volcano with the current IE latest version 3.0.7 Please search in BoxVolcano label.

Updated: April 9, 2016 — 12:24 am

The Author

Leave a Reply

Your email address will not be published. Required fields are marked *

Ponsel Rusak © 2016 Frontier Theme