Mobile Damaged

Mobile Repair Solution

How to Flashing the Asus Zenfone 2 Laser

How to flashing the asus zenfone 2 laser is usually used for those of you who want to update ROM Asus Zenfone 2 Laser. Generally a ROM on android Operating System was the place where applications and firmware loaded into a read-only memory of the device. A user can upgrade or downgrade the firmware complies with his wishes by changing or updating ROM on the device androidnya.

In addition the way flashing asus zenfone 2 laser can also be applied to overcome some of the problems that occur on the asus zenfone 2 laser induced error in root or issues like bootloop, camera is not found, and a variety of other issues. Then how do I flashing Asus Zenfone 2 this Laser? Here we will explain the steps-stride

Before you start flashing, you need to prepare a few things including the following:

  • You need to set up Asus USB Driver, USB Driber this Asus device used to connect with your computer or laptop that doesn't have USB drivers Asus. You can download the usb driver of asus at the following link http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE500KL/ASUS_Android_USB_drivers_for_Windows_20141015.zip
  • ADB also prepare the Fastboot Tool, as a tool to enter fastboot menu was. You can download this tool at the following link http://adf.ly/sb8Zt
  • You need to also prepare the Firmware for Asus Zenfone 2 Laser, for Stock ROM you can see at the following link URhttp://www.asus-zenfone.com/2015/08/asus-zenfone-2-laser-stock-rom-ze500kl-ze550kl.html,

For those of you who want instant-ZE500KL Firmware you can download at the following link http://support.asus.com/download.aspx?SLanguage=en&p=39&s=1&m=ASUS%20ZenFone%202%20Laser%20%28ZE500KL%29&os=&hashedid=n/

As for the ZE550KL Firmware you can download at the following link http://support.asus.com/download.aspx?SLanguage=en&p=39&m=ASUS%20ZenFone%202%20Laser%20%28ZE550KL%29&hashedid=n/a

Choose the OS Android > Firmware and rename URfile.zip

Seleh you prepare everything needed from both the USB drivers, the ADB Tool and Firmware we will go on the way of flashing asus zenfone 2 laser, steps-following in his footsteps

  1. The first step you have to do is turn off your Laser Zenfone 2
  2. After it enters the recovery menu by pressing volume up + power at the same time
  3. After entering the recovery menu, select the Apply Updates From ADB
  4. Next connect the Asus Zenfone 2 with your computer or laptop using the USB cable. If it does not connect install it first Asus USB drivers on your laptop or computer, and then try to connect it got back. Make sure your mobile phone is connected properly
  5. Next enter the extract folder of ADB on your computer, After terekstrak entry into the ADB folder and open a command prompt by clicking Shift + right click and select Open Command Prompt
  6. Next check the connection type ADB devices, if the connection is successful it will pop up a list of zonfone devices 2 laser
  7. Once it appears, type adb sideload URfile.zip (URFile.zip = firmware filename match with asus zenfone that you downloaded earlier. Make sure the name is correct, large and small influential hurus)
  8. Wait until the process is complete
  9. Zenfone 2 you have done flashing for cleaning thoroughly

Read also: how to create a RJ45 cable TAT Mode Samsung

Quite easy is not the way flashing Asus Zenfone 2 this Laser? Hopefully helpful

Updated: April 9, 2016 — 4:24 am

The Author

Leave a Reply

Your email address will not be published. Required fields are marked *

Ponsel Rusak © 2016 Frontier Theme