How to flash hp nokia without box-thanks to the readers who've taken the time to read the article this Nokia software repair, most of the content of this article was forced to changed a bit because this article is already in the raw-raw samples by another blogger that cause these articles disappear from google search engine.
Understanding flash hp Nokia:
Are simply the same as computers do reinstall windowsnya, so too with hp Nokia we delete and then write back the official os from Nokia product code corresponds to each hp. Are required hp firmware that will be flashed., box flasher as tools injeck firmware, and also fbus cable/data cable.
Because most do not have box flasher then munculah ideas friends technician to remove the software flash hp Nokia flasher box without using altogether and just have a Nokia data cable question.
What are the damages that could be addressed by means of flash? :
- Nokia's hank, because internal memory hp already fullness
- Forgot key HP Nokia phone so it can't be used
- Blank aka just a white screen appears just
- Restart, only live for a short while until the logo of Nokia continued to die again
- Nokia dead total (totally off), if the damage to the software in such a way can cause the hp cannot boot aka dead.
How to flash hp Nokia data cable only:
Please take the first have toolnya below:
- BEST URv1.5.rar (password: ponselrusak.com)
- Nokia PC Suite
- Nokia USB rom driver/Google Drive
- LINK To FIRMWARE NOKIA BB5
- LINK To FIRMWARE NOKIA DCT4
The following tutorial:
- Extract the firmware first and then install the nokia pc suite with him you have downloaded, just click next until finish.
- Extract the download results above software and then open the URBEST4.exe folder results in the extract above.
- Click connect trus select usb as interface.
- Then click settings–> data package path–> verify results folder which you want to install the nokia firmware be flashed.. By default between
- C:Program FilesNokiaPhoenixProducts or
- C:Program FilesCommon FilesNokiaProduct or in
- C:program FilesCommon FilesNokiaDataPackageProduct
- If not found in one directory, then click ' change active directory ' and select the place contained the results of your firmware.
- If You download any files already so, then can enter manual at the MCU, PPM, CNT and its by clicking the buttons one by one.
- Then click again setting—other–> > check mode–choose the mobile telephone generation >, can BB5/infineon/or auto only.
|The Nokia Generation|
- Set up hp to flash with the battery installed. Then check the ' dead ', ' fashion factory set ' last click ' FLASH ' followed by striking the usb to the mobile telephone.
- When the usb is plugged in after (then pressed button ' on ' for some types) appearing request to install the Motorola usb driver rom, then navigate to folder Nokia usb rom you downloaded and extract it first.
- May be repeated with unplug the battery and click ' flash ' restart then plug it in again until the driver is actually installed to a nokia usb hence.
This article is already available in the form of eBooks, please Download the PDF
To see the collection of Nokia firmware BI Only please visit Nokia Firmware page BI
So the tutorial how to flash hp nokia without box via usb which is equipped with an image that had been Damaged mobile phones Describe, for which he intends to make this article please style your own language are healthy. for a longer try flash good luck and thank you for leaving your comments below.